Research Projects Undertaken:

RESEARCH

Faculty Journal Publications

1. P.Vanitha,’Protection Against Flash Hazards In 400 Kv Air Insulated Substations Using EPRI HVAC AF In The Electric Transient Analyzer Program’,IJIEEE,ISSN-2395-1052,2024.
2. P.Vanitha,’Modeling and Simulation for Charging EVs with PFC converter’,IEEE Conference,ISBN 979-8-3503-4023-5,2023.
3. P.Vanitha,’Enchanching safety againgst flash Hazard in a 400KV air insulated substation(AIS) by incorporation a fault current limiter within the electric transient analyser program ‘,ICOSEC-IEEE Conference,ISSN(P) 2347-6982,2023.
4. S.Jerril Gilda,’Enchanching safety againgst flash Hazard in a 400KV air insulated substation(AIS) by incorporation a fault current limiter within the electric transient analyser program ‘,ICOSEC-IEEE Conference,ISSN(P) 2347-6982,2023.
5. S.Jerril Gilda,’Implementation of intelligent control techniques applied on a line follower vehicle controller’,IEEE Conference,ISBN 979-8-3503-4023-5,2023.
6. S.Jerril Gilda,’Design And Implementation of Robot Based on Xgboost For Smart Powerline Maintenance’,IJSART,ISSN-2395-1052,2024.
7. S.Jerril Gilda,,.’Protection Against Flash Hazards In 400 Kv Air Insulated Substations Using EPRI HVAC AF In the Electric Transient Analyzer Program’,IJIEEE,ISSN-2395-1052,2024.
8. K.Niraimathy,’Enchanching safety againgst flash Hazard in a 400KV air insulated substation(AIS) by incorporation a fault current limiter within the electric transient analyser program’,ICOSEC-IEEE Conference,ISSN(P) 2347-6982,2023.
9. A.Jaffar Sadiq Ali,’Extended EDAS Analysis for Multi-Criteria Decision-Making Based on Distributed Generation (DG) Technologies System’,Journal on Electronic and Automation Engineering,ISSN: 2583-6951,2024.
10. A.Jaffar Sadiq Ali,’Design-of-High-Performance-Permanent-Magnet-Synchronous-Motor-for-All-Electric-Aircraft-Propulsion-System-Using-TOPSIS-Method’,Journal on Electronic and Automation Engineering,ISSN: 2583-6951,2023.
11. K.Shanthi, ‘Extended EDAS Analysis for Multi-Criteria Decision-Making Based on Distributed Generation (DG) Technologies System’,2024.
12. K.Shanthi ,’Development of Grid connected Microinverter based on integration of CUK converter with a switchgear structure’,IDCIoT-IEEE Conference,ISBN:979-8-3503-2753-3,2024.
13. K.Shanthi,’Design-of-High-Performance-Permanent-Magnet-Synchronous-Motor-for-All-Electric-Aircraft-Propulsion-System-Using-TOPSIS-Method’,Journalon Electronic and Automation Engineering,ISSN: 2583-6951,2023.
14. K.Prema Kandasamy,’Performance Improvement of Interleaved Boost Converter for Electrical Vehicle Charging Applications.’,ICACRS-IEEE Conference,ISBN:979-8-3503-4023-5,2023.
15. V.Anitha, “ Ceaseless steganographic approaches in machine learning” Elsevier- Measurement Sensors, ISSN 2665-9174, 2023.
16. V.Anitha, “Autonomous Bus to Avoid Covid Pandemic Situation” International Journal for Science and Advance Research in Technology, ISSN 2395-1052, 2022.
17. V.Anitha, “Design of Intelligent Health and Smart Tracking System for Soldier Using Internet of Things” International Journal for Science and Advance Research in Technology, ISSN 2395-1052, 2022.
18. V.Anitha, “An Operative Acute Brain Tumor Recognition by Jointure Inward Unswerving Probabilistic Neural Network Classifier” Journal of Medical Imaging and Health Informatics, ISSN 0022-1945, 2022.
19. S.Jerril Gilda, “Analysis and Design of a Grid Connected Real Plant in Pennalur Using ETAP Software”,International journal for scientific research and development,ISSN :0973-4562,2020.
20. S.Jerril Gilda, “Dynamic Voltage Restorer Employing Fuzzy Based Control For Power Quality Improvement”, International journal for scientific research and development, ISSN 2581-5792,2020.
21. S.Keerthana,”Iot Based Forest Fire Detection and Early Warning System Using Raspberry Pi”, International Journal of Engineering Research and Technology (IJERT) (submitted),ISSN:2278-018, 2020.
22. Prema Kandasamy, “Three Phase Rectifier Control Techniques: A Comprehensive Literature Survey” International Journal of Science and Technology, ISSN 2277-8616, 2020.
23. V.Anitha, “IoT Based Forest Fire Detection and Early Warning system Using Raspberry PI” Journal of Inter- disciplinary cycle Research, ISSN 2156-7018, 2021.
24. V.Anitha, “Solar power Assisted Electric vehicle Battery Balancing system for pollution control” International Journal of Research in Engineering Science and Management, ISSN 2581-5792, 2019.
25. V.Anitha, “Capacitor less UPFC for power quality improvement using Dead-Beat Controller” International journal of research in engineering science and management, ISSN 2581-5792, 2019.
26. P.Vanitha, “Design and Implementation of Unmanned Ground Vehicle”,International Journal of Research in Engineering,Science and Management, 2019.
27. P.Vanitha , “A Novel Approach for Mine Detection Using IoT”,International Journal of Research in Engineering,Science and Management, ISSN 2581-5792,2019.
28. G.Kannan, Dr.D. Padma Subramanian, “Optimal Reactive Power Dispatch Using Autonomous Groups Particle Swarm Based Optimization” Journal of Electrical Engineering,2019
29. G.Kannan, “Microwave Antenna for Brain Tumour Sensing Research System using Image Processing”, The International Journal of Engineering and Advanced Technology (IJEAT) SCOPUS,2019.
30. T.Madhan, “Smart railway platform for people in Railway junction”, International journal for scientific research and development,ISSN 2321-0613,2019.
31. K.Niraimathy, “Hybrid Energy Based Energy Harvesting and Nutrient Detection on the Agriculture Field Usiong Internet of Things”, International Journal for Scientific Research & Development, ISSN : 2321-0613,2019.
32. K.Niraimathy, “Optimal Location and Sizing of Multi Type Facts Device Using Grey Wolf Optimization Technique”, International Journal of Research in Engineering,Science and Management,ISSN 2581-5792, 2019.
33. S.Jerril Gilda, “Driving License Based VehicleAuthendication System and Safety Using Internet of Things”,International journal for scientific research and development,ISSN 2321-0613,2019.
34. S.JerrilGilda, “A Wireless Health Monitoring System Using Mobile Phone Accessories ”, National Conference on Advance in Electrical and Electronics Engineering, 2018, pp164-172 held at Sri Venkateshwara College of Engineering.
35. P.Vanitha, “Automatic Vehicle Over Speed Control By Using RF Module”, National Conference on Advance in Electrical and Electronics Engineering, 2018,pp 178-184, held at Sri Venkateshwara College of Engineering.
36. T.Madhan, “Electricity Theft Detection In Low Voltage Networks With Smart Meters Using State Estimation”, National Conference on Advance in Electrical and Electronics Engineering, 2018, pp 124-130, held at Sri Venkateshwara college of Engineering.
37. K.Niraimathy, “A Hybrid (Solar ,Wind) power generation for AC/DC load using SEPIC converter Inverter”, International Conference on Recent Development in Engineering,2018, pp 112-118, held at Sri Venkateshwara College of Engineering.
38. A.Azeezur Rahman, “Next Generation Navigation of Small Boat Using Fuel Cell Integration”, International Conference on Engineering Technology and Science, 2018,pp 131-137, held at Sri Venkateshwara College of Engineering.
39. R.Santhanapoongodi, “New Control Of PV Solar Farm as STATCOM For Increasing Grid power Transmission During Night and Day”, International Conference on Engineering Technology and Science, 2018,pp 121-127, held at Saveetha Engineering college.
40. S.Keerthana, “Smart Purification of Boll Filter Using Raspberry pi”, National Conference on Advance in Electrical and Electronics Engineering 2018, pp101-107, held at Sastha Institute of Technology.

Faculty Conference Publications:

1. P.Vanitha,’Modeling and Simulation for Charging EVs with PFC converter’,IEEE Conference,ISBN 979-8-3503-4023-5,2023.
2. P.Vanitha,’Enchanching safety againgst flash Hazard in a 400KV air insulated substation(AIS) by incorporation a fault current limiter within the electric transient analyser program ‘,ICOSEC-IEEE Conference,ISSN(P) 2347-6982,2023.
3. S.Jerril Gilda,’Enchanching safety againgst flash Hazard in a 400KV air insulated substation(AIS) by incorporation a fault current limiter within the electric transient analyser program ‘,ICOSEC-IEEE Conference,ISSN(P) 2347-6982,2023.
4. S.Jerril Gilda,’Implementation of intelligent control techniques applied on a line follower vehicle controller’,IEEE Conference,ISBN 979-8-3503-4023-5,2023.
5. K.Prema Kandasamy,’Performance Improvement of Interleaved Boost Converter for Electrical Vehicle Charging Applications.’,ICACRS-IEEE Conference,ISBN:979-8-3503-4023-5,2023.
6. K.Shanthi ,’Development of Grid connected Microinverter based on integration of CUK converter with a switchgear structure’,IDCIoT-IEEE Conference,ISBN:979-8-3503-2753-3,2024.
7. K.Niraimathy,’Enchanching safety againgst flash Hazard in a 400KV air insulated substation(AIS) by incorporation a fault current limiter within the electric transient analyser program’,ICOSEC-IEEE Conference,ISSN(P) 2347-6982,2023.
8. P.Vanitha, “Smart Stick using Ultrasonic Sensors for Visually Impaired” International National Conference on Advances in Parallel Computing Technologies and Applications 2022, held at T.John Institute of Technology, Karnataka.
9. P.Vanitha, “Optimum Energy Harvesting and Analysis Of an Integrated Solar PV Panel” National Conference on Advance in Electrical and Electronics Engineering 2018, pp 92-97, held at Rajalakshmi Institute of Technology.
10. G.Kannan, “Quasi-Z-source inverter based PV power conditioning system”, International Conference on Computation of Power, Energy, Information and communication 2017,pp 82-86, held at Rajalakshmi Institute of Technology.
11. S.Keerthana, “IOT Based gas safety system”, International Conference on Computation of Power, Energy, Information and communication 2017, pp 52-58, held at Saveetha Engineering College.
12. S.Prabhu, “First person evidence capturing system”, International conference on computation of power, energy, information and communication 2017, pp 72- 78, held at SKR Engineering College.
13. R.Siva , “Accident prevention by Eye gaze and face recognition using open CV” International conference on computation of power, energy, information and communication 2017,pp 75-81, held at SKR Engineering College.
14. A.Selva Vinayagam , “ Automatic vehicle tracking and locking system” International conference on emerging engineering trends and science 2017,pp 52-58,held at Sastha Engineering College.
15. T.Ravi Kumar, “Voice activated home assistant system, “International conference on emerging engineering trends and science 2017, pp 32-38, held at Rajalakshmi Engineering College.
16. A.Azeezur Rahman, “Single stage inverter for grid synchronization”, International conference on emerging engineering trends and science 2017, pp 160-168, held at Rajalakshmi Engineering College.
17. A.Suganya, “Solar Powered Radio Controlled Glider”, International Conference on recent innovations in science engineering and technology 2016, pp 180-186, held at Madha Engineering college.
18. M.Aarthi Elaveini, “Design and Implementation of Fully Automated Public Distribution System”, International Conference on recent innovations in science engineering and technology 2016, pp 212-218, held at Madha Engineering college.
19. T.Ravi Kumar, “Smart Bike with Automatic Zone Deduction for Safe Driving”, International conference on Emerging areas in science, Management, engineering and technology 2016, pp 225-232, held at Easwari Engineering College.
20. S.Prabhu, “Bus Detection for Blind Using Wireless Sensor Network”, International conference on Emerging areas in science, Management, engineering and technology 2016, pp 265-272 held at Easwari Engineering college.
21. A.Suganya, “Smart Mirror Based on Internet of Things”, International Conference on recent innovations in science engineering and technology 2016, pp 212-220, held at Matha Engineering College.
22. T.Madhan, “Smart Trolley for Automated Billing Using Radio Frequency Identification Device”, International Conference on Engineering Technology and Science 2016, pp 222-228, held at Matha Engineering College.
23. P.Vanitha, “Autonomous Quad Copter”, International Conference on Engineering Technology and Science 2016, pp 262-270, held at Matha Engineering College.
24. S.Keerthana, “A Security Enhanced Authentication System Based on OTP” International Conference on Engineering Technology and Science 2016, pp 240-248, held at Matha Engineering College.
25. G.Janaki, “Performing Three Phase Stable Operation Using PV Unit”, International Conference on recent innovations in science engineering and technology 2016, pp 25-31, held at Dhanish Ahamed college of Engineering.
26. S.Jerril Gilda, “Design and Implementation of Vehicle Communication Using Li-Fi Technology” International Conference on recent innovations in science engineering and technology 2016, pp 225-231, held at Dhanish Ahamed college of Engineering.
27. A.Selva Vinayagam, “Wireless Animal Activity Monitor”, International Conference on recent innovations in science engineering and technology 2016, pp 238-245, held at Dhanish Ahamed college of Engineering.
28. P.Vanitha, “Impact of DPFC Pulse Width Modulation to Improve Power Quality Based on Hysteresis”, National Conference on Innovation in Computing and Communication 2016,pp 541-548, held at VELS University.
29. S.Jerril Gilda, “Power Flow Stabilisation in Micro Grid with Energy Storage System using Cascaded Converter”, National Conference on Innovation in Computing and Communication 2016, pp 320-328, held at VELS University.
30. R.Santhanapoongodi, “A new state of charge estimation algorithm for lead acid battery”, International Conference on Computation of Power, Energy Information and Communication (ICCPEIC) 2016,pp 225-232, held at DMI college of Engineering.
31. T.Ravikumar, “Mulimodal Medical Image Fusion Using Non Subsampled Contourlet Transform Domain”, International conference on Trends in Engineering and Technology, Science and Humanities and Management 2016,pp 130-137, held at Tamizhan College of Engineering and Technology
32. S. Kalaiselvi, “Driver Drowsiness Detection using MATLAB”, International conference on Trends in Engineering and Technology, Science and Humanities, 2016, pp 121-128, held at Loyola Institute of Technology.
33. A.Selvavinayagam, “Optimal Design of a Stand-Alone Hybrid Wind-Solar-Diesel Power System”, National Conference on Recent Trends in Power Systems, 2016, pp 141-148, held at DMI College of Engineering.
34. A.Selvavinayagam, “Optimal controlling of ESS in coordination with RES in DG system”, National Conference on Recent Trends in Power Systems, 2016,pp 160-168, held at DMI College of Engineering.
35. S.Jerril Gilda, “Solution for Economic Dispatch Problem by using PSO and ABC Algorithms”, National Conference on Recent Trends in Power Systems 2016,pp 178-184, held at DMI College of Engineering.
36. K.Niraimathy, “Improvement of Transmission Line Load ability Using Multi Type Facts Devices”, National Conference on Recent Trends in Power Systems, 2016,pp 191-198, held at DMI College of Engineering.
37. A.Azeezur Rahman, “Mitigation of the power Quality Issues Using co-ordination of Bees with STATCOM in a Grid Connected System”, National Conference on Smart Grid and Renewable Energy Sources 2016, pp 125-132, held at Saveetha Engineering College.
38. G.Kannan, “Reactive Power Pricing in a Deregulated Competitive Electricity Market using Differential Search Algorithm”, National Conference on Recent Trends in Power Systems 2016, pp 126-135, held at Rajalakshmi Engineering College.

Student Conference Publication: